Asphalt tanks and asphalt storage tanks are characterized by fast heating, energy saving, large production volume, no waste, no aging, and easy operation. All accessories are on the tank body, which is particularly convenient for moving, hoisting and maintenance. , This product is heated to 160 degrees of hot asphalt generally not more than 30 minutes.

             Asphalt storage tank, asphalt heating tank is an "internal heat type part (part) rapid asphalt storage heater device". It is convenient to move the equipment. The product not only heats up quickly, saves fuel, but also does not pollute the environment. The operation is simple and easy. The automatic preheating system completely eliminates the trouble of baking or cleaning asphalt and pipes. The automatic circulation program makes the asphalt automatically enter the heater, Dust collector, induced draft fan, asphalt pump, asphalt temperature display, water level display, steam generator, pipeline and asphalt pump preheating system, pressure relief system, steam combustion support system, tank cleaning system, oil unloading and entering tank device, etc., all missing All are installed on the tank body (inside) to form a compact integrated structure. Asphalt storage tanks make up for the long heating time and high energy consumption of traditional heat transfer oil heating equipment. A local heater is set in the asphalt tank, which is suitable for asphalt storage and heating in traffic and municipal systems.

               After the asphalt tank and asphalt storage tank are installed in place, please check whether the connection of each part is firm and tight, whether the running parts are flexible, whether the pipeline is smooth, and whether the power connection is correct; when the asphalt is loaded for the first time, please open the exhaust valve so that the asphalt can enter the heating smoothly. Before ignition, please fill the water tank with water, open the valve to make the water level in the steam generator reach a certain height, and close the valve; when the asphalt storage tank is running, please pay attention to observe the water level and adjust the valve to keep the water level in the proper position. ;If the asphalt contains moisture, please open the tank top access hole when the temperature is 100 degrees, and start the internal circulation dehydration; after dehydration, please pay attention to the indication of the thermometer, and pump out the high-temperature asphalt in time. If the temperature is too high, it is not necessary When shown, please quickly start the inner circulation to cool down.

           When the asphalt heating tank and the asphalt liquid level in the asphalt tank is lower than the position of the thermometer, please close the suction valves before the asphalt pump stops to prevent the asphalt in the heater from flowing back.